R.D. & Associates Specialized Services Inc

Equipment

This is a partial list of the equipment used by R.D. & Associates Specialized Services Inc.

Bobcat Loader: This is the Bobcat Loader that R.D. & Associates uses for most landscape and excavating applications.

Tracked Bobcat: This is the Bobcat 864 Compact Track Loader that we use for tough digging applications that require more traction. The rubber tracks make it ideal for soft ground conditions.

Dump Truck: Our Dump Trucks can deliver quantities from as little as one ton or one cubic yard to as many as 15 tons of rock or 16 cubic yards of mulch or compost. We can deliver virtually anything our customers may require with these trucks.

Mower: Brushcat Rotary Mower mows down weeds and brush, including trees up to 3 inches in diameter.

Auger: Our Post Hole Auger attachment allows us to dig deck footings or post holes quickly and efficiently.

Grapple Bucket: The Grapple Bucket attachment is used to move timbers, debris, brush piles or vegetative materials.

Breaker: The Hydraulic Breaker attachment is used to break concrete for fast removal.

Brush Chipper: Morbark Model 13 Brush Chipper, chips brush and tree limbs up to 12 inches in diameter. It reduces brush volume about 7 to 1.

Excavator: The Samsung Excavator can dig over 12 feet deep and has rubber tracks to preserve pavement and lawns.

Stump Grinder: Vermeer Model 502 Stump Grinder, grinds stumps of all sizes, will grind stumps 16-18 inches below ground level.

Tree Terminator: This is the Tree Terminator tree shear. With this attachment we can cut down trees up to 12 inches in diameter in a matter of seconds. This attachment allows us to cut large numbers of smaller trees very quickly, which enables us to clear larger areas at reduced cost to the customer.

Chip Truck: This is the Chip Truck that is used to not only tow the brush chipper, but also to catch, contain, and transport the wood chips produced by the chipper. This truck has a capacity of 30 cubic yards. This capacity enables us to chip and haul brush from one or more jobs, reducing costs.

Manlift: This is our Genie Z45 manlift. It has a working height of 50 feet and four wheel drive which enables us to position it in the best possible location to remove or trim trees with greater efficiency.